Welcome!
CSD, Inc.
A Member of
CGNA
Gas
Pressure Regulation
We offer
Idaho's largest selection of Maxitrol & Sensus Gas Pressure
Regulators.
To
correctly size a gas regulator for maximum performance, We
require the following information:
- Gas Inlet Pressure (normally PSI)
- Gas Outlet Pressurestem (normally inches of W.C.)
- Total Load of Equipment in BTU's
- Vented or Vent Limited
- What Type of
Equipment (i.e. rooftop, boiler)
- Natural or Propane Gas
Maxitrol 325 Series regulators are for 2 psi
and 5
psi
piping systems.
Models available for appliance main burner or pilot applications and as line pressure regulators.
Suitable for natural, manufactured, mixed gases, liquefied petroleum gases and LP gas-air mixtures.
Models available for appliance main burner or pilot applications and as line pressure regulators.
Suitable for natural, manufactured, mixed gases, liquefied petroleum gases and LP gas-air mixtures.
| Model | Rated Inlet Pressure | Certified To |
| 325-3L, 325-5AL, 325-7L | 2psi | ANSI 21.80 Line Regulator Standard |
| 325-3L47, 325-3L48, 325-5AL-48, 325-5L600 (with over protection device attached) |
5psi | ANSI 21.80 Line Regulator Standard |
Click on model
number to download detailed specifications.
Click on any of
the above regulators to download detailed
specifications.
Sensus gas regulators
(formally Equimeter) available in pipe sizes from 1/2" to 3".
Inlet gas pressures from .5 to 125 PSI, Outlet gas pressures to 35 PSI.
Suitable for natural, manufactured, mixed gases, liquefied petroleum gases and LP gas-air mixtures.
Speciality regulators available upon request. Give us a call (208) 375-4422
Inlet gas pressures from .5 to 125 PSI, Outlet gas pressures to 35 PSI.
Suitable for natural, manufactured, mixed gases, liquefied petroleum gases and LP gas-air mixtures.
Speciality regulators available upon request. Give us a call (208) 375-4422